Hi, using MBoot Wifi 2,4GHZ. This use to work fine on MBlock V3 with both USB cable & Wifi connections. However recently issue came up after loading the latest firmware since I can still connect to cable fine, but once connected to Wifi, this Doggle is connecting OK, everything is green, when connected to Wifi but still USB port plugged command is working. However when I disconnect the USB cable and order a command, the Wifi module starts to blink blue really fast as well as the blue smal Led L light, i also here one or two sounds and no command can be established until I reconnect the USB cable. Can someone help me? I already tried multiple time with both Mboot V3 & V5 to reset Default program and upgrade firmware with no success.USB is always disconnected before connected to WIFI that shows green status before activating a command
Cheers,
WIFI 2.4GHZ cannot execute commands
ugo
#1
tech_support
#2
Hi ugo,
Please confirm if your mBot 2.4G version with the 2.4G module and dongle.
Yes you can connect your mBot to the mBlock3 by 2.4G wireless serial or USB cable but one at a time.
So please take a video to show me your issue.
You can send the video to support@makeblock.com
Thanks.