Control mBot Neo with Bluetooth Controller Joystick

[magicmarc]

hi, best_codes! thank you.
the code you sent previously works for the remote controller - bluetooth and the mbot2…
is there a way to use the ‘joysticks’ to control the mbots vs the + (plus sign) control pad (upper left on bluetooth controller)
thanks
m
this is the code u provided last post about using the rmeote controller in get w mbot2

[Best_codes]

Hi @magicmarc!

I’ve written a code for this that you can find here:

Using the Bluetooth Controller with mBot

@nareman Try this: Add the mBot device Go to extensions: [image] Find the Bluetooth Controller extension and add it: [image] Switch to upload mode: [image] This code would control the mBot using the round knob on the left: [image] Important! I have not tested the code above. I do not have the Bluetooth remote. You may have to reverse some values or experiment to get it working; let me know. The code assumes: The joystick returns negative values, but returns 0 on both X and Y when…

You will need to adapt that code to the mBot Neo (I wrote it for mBot). If you need help with that, please let me know!
Also, when you are done converting the code, posting it here on the forum would be useful for other people and for debugging if we run into any issues, so please do!