I bought ultimate 2.0 robot kit. I made a detecting robot. I updated the firmware via micro USB. then I use my cell phone to connect the robot via bluetooth. ut always has error message “cannot recognize the robot use PC version of mblock 3 to update”. I have updated the firmware several times.
Cannot recognize the type of my robot
tech_support
#2
Hi wilson,
When we have this error message, we need to reset default program in mBlock 3 instead of upgrade firmware. Have you tried that?
And which App you used? Is it Makeblock App?
If it still fails, please try to unplug all modules from the main board, and the test again.
wilson
#3
I used makeblock app to control the robot. After unplug all modules and reset default program, I still have same problems. I found that when the robot was connected to PC via micro USB, I can use my cell phone to control the robot via bluetooth. But lost control again after unplugged the USB.
system
#4
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.