This is a plastic plate of my design.The size is 160x160x2mm.There are many holes on it and the distance between each is 8 mm.Both sides of each hole has a step.The plastic plate has a lot of slots, can easily be cut into the shape of you want.
The following are plastic connecting shaft .
Plastic plate
James
#1
paulcobbaut
#2
Am I the only one who is hesitant in cutting these ?
Once cut it cannot be undone, and you never know which size you are going to need for the next project…
Huluwa
#3
It’s made of plastic, low cost, and you can get the right length you need for this project, still enough material left for another project. Thanks for sharing your truly thought about the part, your feedback help us to decide starting production of one part or not…
Markuitos
#4
Hi second paul about cut the parts (with the current link rods I tend to never cut them.
Eric
#5
Of course, the part may be cheaper and to cut off it may be easy. We are now redesigning of it and need some suggetions from your customers. Thank you for all of your support!.