Yesterday, the programs were fine when uploading to the MeOrion board. But today when I tried to upload the programs, It doesn’t work! I tried the Makeblock examples and my programs, they don’t work. I tried both Mblock and Arduino, they don’t work. I tried programs from Makeblock Openlab, they don’t work. The cable works and the blue light blinks when you plug it in and when you start uploading. The red lights also is on when you connect the cable from the board to computer. I am able to get to the uploading part but then this error message appears on both Mblock and Arduino. I have Windows 7.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x55
avrdude: stk500_recv(): programmer is not responding the computer
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x55
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x55
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x55
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x55
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x55
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x55
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x55
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x55
avrdude: stk500_recv(): programmer is not responding
Problem uploading to board. See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x55
( I used Ir ultrasonic program to show.)
I have Arduino version 1.7.10 and Mblock version 3.3.8.
Please respond ASAP. Thanks