Hi all,
anybody has code example how to establish connection with exising Wifi network and post data to web/ip/db?
So far I was able to setup wifi module but can not find any example how to use it further.
I’m looking for piece code like this one
https://www.arduino.cc/en/Reference/WiFiConfig
Thanks for advice
Hi Jan,
Please send email to tec-support@makeblock.com and we will provide you a document for reference.
Hello
@tec_support:
I am also interrested in this. Perhaps you can modify/add the “Me_Wifi_User_Manuals.doc” document with this information. Also the steps to reset the module described here “http://forum.makeblock.cc/t/me-wifi-dont-work-anymore/4007” should be a candidate for this document …
@Jan_Drasnar:
I was able to upload the project from “https://github.com/jeelabs/esp-link” or as an alternative “https://github.com/beckdac/ESP8266-transparent-bridge” to the Me Wifi Module (with COM to USB cable and a Makeblock cable) with good expierience.
Michael
Hi Jan_Drasnar & MichaelT
The file has been attached
Me_Wifi_User_Manuals.zip (1.1 MB)
Thanks for the document but it contains nothing new (it is available via the ME Wifi module page) and does not really help (at least for my problems, see http://forum.makeblock.cc/t/me-wifi-dont-work-anymore/4007 and also for some other problems, e.g.: http://forum.makeblock.cc/t/connecting-mewifi-to-home-router/4277).
So a better description and more meaningful examples would be very helpful, because I think the Wifi module is very interesting and has much potential together with a robot kit.
Michael
Hi MichaelT
It doesn’t contain other example programs while there is explanation about how to connect the me wifi module to the wifi network from the Router.
Here is another file made by one of our colleague who is very interested in research the me wifi module just for reference.Me WiFi module Design Report.zip (117.9 KB)