Lipo battery in the assembly guide


#1

in the assembly guidance the following battery is used :
which the discharge rate used is 30c

and the battery which I bought is this one and in previous question I asked if it’s compatible with the robot and the answer that I should use the 25c battery

is there any harm to use this battery


#2

I’d suspect there is no harm. The voltages and amperages appear to be the same, only the mAH (milliamp hours) are different which translates into slightly less run time. @tec_support can likely confirm this is the case. :slight_smile:


#3

The discharge rate has relationship with maximum discharge current. 25c and 30c have no big difference, since you already have the 30C battery, I think you can try it.
Besides, you may also consult the shop who sells the battery for more professional explanation.


#4

yes that is what I thought also


#5

ok I will try, since I bought it from the internet and there is no such local store here the only thing I have is just to try

Thank you :slight_smile:


#6