Laserbot doing wired things


#1

Hi,
my Laserbot is doing strange engravings. In cuttingmode its no problem.
See picture:

Both circles are done with the same file, made in photoshop and exported to png. Jpeg makes the same problems.
I guess my assemble work was fine, because the cut circle is ok (could be better, I know). With cutting svg files I don´t have any problems.

Hoping for help
:slight_smile:

PS: is there as chance to connect VisiCut with the Laserbot?


#2

Hi jendrik,

Only the mLaser software can connect and control the Laserbot software.
For the difference on result between engrave and cut, could you kindly provide your test image and we will give a test here.


#3

circle

There it is :slight_smile:
I made this file because I had the problem with another file. The circle was just for testing to see if my file is corrupted or the Laserbot/mLaser
Thanks for your help !!


#4

The problem is not only with engraving. When I try to cut a png or jgp the Laserbot is also doing totally wrong stuff.
engel@0,5x


#5

Hi Jendrik,

We tested your image models today, the result is okay for both cut and engrave, please see picture below:
image
image
Usually, engrave is more completed and need more time during which the mechanical structure may be loose somewhere so you got a ellipse.
You may need check the mechanical structure and adjust if there is loose.


#6

it´s a myst… thanks for your support!
Now I know that I am too stupid to setup the printer correctly :frowning:


#7

Hi jendrik,

Good to hear that you figured it out! Well Done!
Do you mind to share the details of the mistake which cause the issue? It may be helpful for other users too.

BR!


#8